Regenerativer 4-Quadrant-Netzsimulator der Serie 61800

The new 61800 network simulators were developed to verify the fulfillment of the test requirements according to IEEE 1547 / IEC 61000-3-15 / IEC 62116; they consist of a regenerative 4-quadrant network simulator with numerous voltage waveform simulation options 

Stk :  
Offerte anfragen

 
 Output voltage U LN: 0 - 300 V or 0 - 350 V 
  Output voltage U DC: 0 - 424 V or 0 - 495 V
  Output frequency: DC, 30 Hz - 100 Hz
 Full 4-quadrant, fully regenerative up to 100% of the output current
 capacity Especially for the Testing of PV inverters and intelligent inverters developed
 User-selectable single-phase or three-  phase output
 Programmable current rate setting for voltage and frequency
 Programmable limit values for voltage and current
Phase control when switching on and off
 LIST, PULSE, STAGE mode functions for testing the simulation of line faults ( PLD)
 Simulation of voltage  dips , short interruptions and voltage changes
 Waveform synthesizer for harmonics, intermediate oscillations
Comprehensive measuring capabilities, including current harmonics
 Programmable analog interfaces
 Remote interface: GPIB, RS-232, USB and Ethernet
 Parallel output for high-performance applications (only three phases) 

 AC load operation only for 61830, 61845 and 61860)

 Type Output voltage
LN / DC 

V

 Output frequency
Hz
 Power
kVA
 Number of phases
618090 .. 350/0 .. 495DC, 30 .. 1009 (3 / phase)1 or 3, configurable
618120 .. 350/0 .. 495DC, 30 .. 10012 (4 / phase)1 or 3, configurable
618150 .. 350/0 .. 495DC, 30 .. 10015 (5 / phase)1 or 3, configurable
618300 .. 300/0 .. 424DC, 30 .. 10030 (10 / phase)1 or 3, configurable
618450 .. 300/0 .. 424DC, 30 .. 10045 (15 / phase)1 or 3, configurable
618600 .. 300/0 .. 424DC, 30 .. 10060 (20 / phase)1 or 3, configurable
61800-1000 .. 300/0 .. 424DC, 30 .. 100105 (35 / phase)1 or 3, configurable